Need help?Do you have a question about the Inovance GL20-0808ETN and is the answer not in the manual?
General| Model | GL20-0808ETN |
|---|---|
| Input Type | Digital |
| Number of Inputs | 8 |
| Number of Outputs | 8 |
| Communication Protocol | Ethernet |
| Voltage Rating | 24V DC |
| Storage Temperature | -20°C to 70°C |
| Protection Class | IP20 |
| Output Type Details | Transistor |
| Humidity | 5% to 95% RH, non-condensing |
Describes the module and the guide's purpose.
Lists certifications and standards the product complies with.
Lists related product documentation and data codes.
Details the document's versioning and release dates.
Provides instructions on how to download the PDF manual.
Outlines the product's warranty period and conditions.
General safety advice for operating the equipment.
Defines hazard levels like Danger, Warning, and Caution.
Safety considerations for control system design.
Specific warnings related to output signals and system design.
Critical safety warnings for installation procedures.
Cautions regarding installation and ventilation.
Dangers associated with electrical wiring practices.
Cautions for safe wiring and power connection.
Cautions for maintenance, inspection, and cleaning.
Best practices for safe operation and program modification.
Precautions for environmentally sound product disposal.
Explains the product's model designation and its components.
Identifies and describes the physical components of the module.
Details electrical parameters for the module's power supply.
Lists electrical characteristics for the digital inputs.
Lists electrical characteristics for the digital outputs.
Describes the module's behavior in different software states.
Provides physical dimensions for module installation.
Describes various methods for installing the module.
Details the procedure for mounting the module onto a DIN rail.
Explains the steps for detaching the module from the DIN rail.
Guides on selecting appropriate cables and terminal lugs.
Defines the function of each terminal on the module.
Illustrates input and output wiring diagrams for the module.
Covers adding module, setting output status, and mapping I/O.
Covers defining variables and compiling the project using LD.
To Next Page
