Need help?Do you have a question about the Inovance MD290T22G/30P and is the answer not in the manual?
Covers essential safety precautions for electrical work, machine design, and personnel safety when using the AC drive.
Detailed mounting dimensions, clearance requirements, and step-by-step installation methods.
Details on typical system connections, main circuit terminals, and wiring recommendations.
A step-by-step flowchart for initial setup, including parameter configuration for motor auto-tuning.
Detailed description of parameters for command source, frequency reference, and motor auto-tuning.
Parameters for various protections like motor overload, phase loss, and fault reset actions.
Details on available serial communication protocols like RS485, CANopen, CANlink, and PROFIBUS-DP.
Essential safety precautions and solutions for common problems during trial run.
Procedures for displaying, resetting faults, and diagnosing common fault codes.
A comprehensive list of faults, their causes, and suggested solutions for troubleshooting.
Description of standard function parameters within groups F0, F1, and related settings.
General| Model | MD290T22G/30P |
|---|---|
| Category | DC Drives |
| Power | 22 kW |
| Rated Power | 22 kW |
| Rated Current | 30 A |
| Protection Class | IP20 |
| Cooling Method | Forced air cooling |
| Input Voltage | 3-phase 380V AC |
| Control Mode | V/F control, vector control |
| Protection Features | Overcurrent, overvoltage, undervoltage, overload |
To Next Page