Inovonics FA416 User Manual

Important Notes
This product is designed to be installed and maintained by professional
security technicians.
Unless specifically noted, Inovonics products are intended for indoor use. This
receiver is intended for use with indoor security systems. Use in outdoor
applications may impair performance.
Test system regularly.
FA416 / FA416D
FA416R / FA416DR
Frequency Agile
®
900MHz
16-Channel / 4-Output Receiver
Installation Instructions
02304E
Document revision history
Rev. Level Description Date
C Create F:\Eng\parts\02304\02304C.doc from
P:\Master.dox\FA_dox\FA416_v3.doc
7/19/01
D Replace ISO logo 10/08/01
E Page 5: replace “95%” with “90%”
Page 6: add “effectively reverses relay polarity”
Page 10: replace “access code to 3446” with “System ID”
10/29./02

Inovonics FA416 Specifications

General

Brand	Inovonics
Model	FA416
Category	Receiver
Language	English

Summary

Inovonics FA416 Receiver Overview

FA416 Receiver Description

Provides a general overview of the FA416 receiver and its capabilities.

FA416 Key Features

Details the features of the FA416, FA416D, FA416R, and FA416DR models.

Technical Specifications

Product Specifications

Details physical dimensions, weight, environmental, and electrical specifications.

Installation and Connectivity

Installation Procedures

Covers power connection, mounting, opening housing, and installing modules.

Panel Wiring Diagrams

Illustrates typical connections between the receiver and a hardwire panel.

Transmitter Programming

Programming Methods

Explains how to program transmitters with and without the FA516 display module.

Receiver Operation and Status

Output and Fault Behavior

Describes how outputs activate and how fault conditions are indicated.

Using the FA516 Display Module

Details interpreting fault and active conditions using the FA516 display module.

Resetting and Troubleshooting

Resetting Outputs and Defaults

Explains how to reset outputs, delete points, and restore factory defaults.

Troubleshooting Guide

Provides guidance for diagnosing and resolving operational problems.

Appendices

Appendix A: Default Receiver Parameters

Lists default receiver settings for system ID, supervision, and access codes.

Appendix B: Default Transmitter Parameters

Details default transmitter settings for points, contacts, and check-in intervals.

Appendix C: Transmitter Specifications

Provides specifications for various Inovonics Frequency Agile series transmitters.

Appendix D: Warranty and Disclaimer

Outlines the product warranty terms and disclaimers.