4. Enter the Network SSID(name), then select the type of security you want from the drop-
down menu. You can select:
l None—No security.
l WEP—Wired Equivalent Privacy. Note:A password is required.
l WPA/WPA2 PSK—Wi-Fi Protected Access. Note:A password is required.
l 802.1x EAP—802.1x Extensible Authentication Protocol.
Note
If you aren't sure which security type to select, see your
network setup documentation.
5. Touch Save. Your new network appears in the list of available networks.
Note
See Connect to a Wi-Fi network (on the previous page) for
connection instructions.
www.insigniaproducts.com
32
Insignia NS-15AT07 7" Wi-Fi Android™ Tablet
To Next Page
Loading...
