Before using your new product, please read these instructions to prevent any damage.
This apparatus is intended to be supported by a UL Listed wall mount bracket.
Warning
OR
Composite video
and analog audio
OR
Identifying cables
Your TV has several connection types for connecting devices. For the best video quality, connect
a device to the best available connection.
You can use the HDMI 1(DVI) jack to connect a DVI device to your TV. You need to attach the
HDMI-to-DVI adapter to the end of the HDMI cable that connects to the DVI device’s jack.
Connection type Video quality Cable connector
HDMI video/audio
Best
Component video
and analog audio
Better
Good
WE ARE GOING GREEN!
A copy of your User Guide is not provided in
the box but is available online.
Go to www.insigniaproducts.com,
then click Support & Service. Enter your
model number in the box under Manual,
Firmware, Drivers & Product Information,
then click .
AUDIO/VIDEO
OUT
CABLE
AUDIO/VIDEO
OUT
HDMI 2
(ARC)
P
B
L - AUDIO - R VIDEO/Y USB
P
R
COMPONENT IN
AUDIO
OUT
AV IN
HDMI 2
(ARC)
P
B
L - AUDIO - R VIDEO/Y USB
P
R
COMPONENT IN
AUDIO
OUT
AV IN
HDMI 2
(ARC)
P
B
L - AUDIO - R VIDEO/Y USB
P
R
COMPONENT IN
AUDIO
OUT
AV IN
Front features
Installing the stand
1 Carefully place your TV screen face-down on a cushioned, clean surface to protect
the screen from damages and scratches.
2 Secure the stand to the screen with the two provided screws.
Installing a wall-mount bracket
1 Carefully place your TV screen face-down on a cushioned, clean surface to protect
the screen from damages and scratches.
2 Remove the four screws that secure the stand column, then remove the column.
3 Attach the wall-mount bracket to your TV using the mounting holes on the back
of your TV. See the instructions that came with the wall-mount bracket for
information about how to correctly hang your TV.
Connecting a DVD or Blu-ray disc player, cable box,
satellite receiver, camcorder, or game station
Using an HDMI cable (best)
Using component cables (better)
Using an AV cable (good)
Connecting an antenna/cable wall jack
Connect a coaxial cable to the ANT/CABLE IN jack on the back of your TV and to the
antenna/cable wall jack.
19" 720p LED HDTV
QUICK SETUP
GUIDE
NS-19E310A13
Thank You
for purchasing this ne Insignia television.
We hope you enjoy the quality and reliability of this
product for years to come.
_______________________________
Remote control
and 2 AAA
batteries
Power cable
Remote control sensor
Power indicator
M4 type (10 mm length) (2 pcs)
M4 type (8 mm length) (4 pcs)
Note: Cable is not provided.
Note: Cables are not provided.
Connect the yellow connector
to the green VIDEO/Y jack.
Note: Cable is not provided.
Note: Cable is not provided.
DC IN
(12V)
HDMI 1
(DVI)
VGA
PC IN
ANT/
CABLE IN
PC/DVI
AUDIO
DIGITAL
OUTPUT
(COAXIAL)
DC IN
(12V)
HDMI 1
(DVI)
VGA
PC IN
ANT/
CABLE IN
PC/DVI
AUDIO
DIGITAL
OUTPUT
(COAXIAL)
TV stand
To Next Page
