What to do if my Insignia NS-20EM50A13 has power but no screen image?
If your Insignia Monitor has power but no screen image, first adjust the brightness. If any colors are missing, check the VGA or DVI cable to ensure it's securely connected. You can also try connecting the monitor to another computer or ensuring that the VGA or DVI cable you are using is not damaged.
Why my Insignia NS-20EM50A13 has no power?
If your Insignia Monitor is not turning on, ensure the A/C power cord is securely connected to both the power adapter and the monitor. Plug another electrical device into the power outlet to verify the outlet is supplying proper voltage. Also, make sure a VGA or DVI cable is installed and the computer is turned on. Check that the VGA or DVI cable is tightly secured to the output port on the back of the computer and check to see if the blue power LED is ON.
Why does my Insignia Monitor display wrong colors?
Wrong or abnormal colors on your Insignia Monitor can be caused by loose or broken pins in the cable connector, leading to an improper connection.
Where to buy replacement power cord for Insignia NS-20EM50A13 Monitor?
If you need a replacement power cord or VGA cable for your Insignia Monitor, these are available. Please contact Insignia Customer Support at 1-877-467-4289 or visit www.insigniaproducts.com.
General| Screen Size | 20 inches |
|---|---|
| Resolution | 1600 x 900 |
| Panel Type | TN |
| Aspect Ratio | 16:9 |
| Brightness | 250 cd/m² |
| Response Time | 5 ms |
| Contrast Ratio | 1000:1 |
| Input Ports | VGA |
| Power Consumption | 25W (operational), 0.5W (standby) |
| Viewing Angle | 90° (H) / 65° (V) |
To Next Page
