Insignia NS-24E200NA14 - Using HDMI (best)

26
NS-24E200NA14 Insignia 24" LED TV
www.insigniaproducts.com
Using HDMI (best)
To connect a computer using HDMI:
1 Make sure that your TV’s power adapter is unplugged and the computer is turned off.
2 Connect an HDMI cable (not provided) to the HDMI jack on the side or back of your TV and to the HDMI OUT
jack on the computer.
3 Plug your TV’s power adapter into a power outlet, then turn on your TV and the computer.
4 Press INPUT to open the INPUT SOURCE list.
5 Press
S or T to highlight HDMI 1or HDMI 2, then press ENTER.
6 Adjust the display properties on the computer, if necessary.
HDMI cable
Side of TV
HDMI cable
connector
HDMI jack
On your TV