To Next PageTo Next Page
How to troubleshoot audio noise on Insignia NS-32D200NA14 LED TV?
Other devices (for example, a surround sound receiver, external speakers, fans, or hair dryers) may be interfering with your TV. Try turning off one device at a time to determine which device is causing interference. After you have determined which device is causing interference, move it further from the TV to eliminate the interference.
What to do if my Insignia LED TV has poor picture quality on some channels but good on others?
The problem may be caused by a poor or weak signal from the broadcaster or cable TV provider. If you connect to cable or satellite TV without a set-top box and experience poor picture quality, you may need to install a set-top box to improve signal reception and picture quality. Contact your cable or satellite TV provider about upgrading to a set-top box.
Why does my Insignia LED TV have no picture and no sound?
Press the power button on the TV or the remote control. Make sure that the Audio Only option is set to Off. Ensure that the video cables are securely connected to your TV. Adjust the contrast and brightness. Make sure that the power cord is plugged in and that the correct video input source is selected. Try another channel as the station may be experiencing problems. Make sure that the incoming signal is compatible. Also, check that the antenna or cable TV is connected correctly and securely. Check the closed caption settings as some TEXT modes can block the screen.
What to do if there are no channels after Auto Channel Search on Insignia NS-32D200NA14?
Reception can vary by channel depending on the broadcast power level of a given station. Contact your cable or satellite TV provider. Make sure that the antenna or cable/satellite TV is connected securely to your TV. Try replacing the cable between the antenna/cable or cable/satellite box and your TV.
What causes dotted lines or stripes to appear on the screen of my Insignia NS-32D200NA14?
Make sure that the antenna or cable TV is connected correctly and securely. If you are using an antenna, the digital channel signal may be low. Make sure that the video cables are connected securely to your TV. The video cable(s) you are using may be bad, so try a new set. Other devices (for example, a surround sound receiver, external speakers, fans, or hair dryers) may be interfering with your TV. Try turning off one device at a time to determine which device is causing interference and then move it further from the TV to eliminate the interference.
General| Screen Size | 32 inches |
|---|---|
| Display Type | LED |
| Resolution | 720p |
| Refresh Rate | 60Hz |
| HDMI Ports | 2 |
| USB Ports | 1 |
| Smart TV | No |
| Inputs | Composite |
| Weight | 10.1 lbs |
