Insignia NS-32D200NA14 - Browsing photos

61
Insignia 32" LED TV
www.insigniaproducts.com
Displaying a list of INlink-compatible
(HDMI CEC) devices
You can select an INlink-compatible device from a
list, then select Connect to switch to the device or
select Root Menu to open the device’s root menu
and use the TV remote control to control the device.
To display a list of INlink-compatible (HDMI CEC)
devices:
1 Press MENU. The on-screen menu opens.
2 Press
W or X to highlight SETTINGS, then press
T or ENTER. The SETTINGS menu opens.
3 Press
S or T to highlight INlink, then press
ENTER. The SETTINGS · INlink menu opens.
4 Press
S or T to highlight INlink Device Lists,
then press ENTER. A list of the HDMI
CEC-compatible devices you have connected
appears.
5 Press
S or T to highlight the device you want,
then press ENTER.
6 Press
S or T to highlight a setting, then press
ENTER. You can select:
• Connect—Wake (turn on) the device if it is in
standby mode or returns to the device if you
have switched to a different video input mode.
• Root Menu—Open the device’s root menu,
then use your TV’s remote control to control
the device, if the device has this feature.
7 Press MENU to return to the previous menu, or
press EXIT to close the menu.
Waking INlink-compatible (HDMI CEC)
devices
When a connected INlink-compatible device is in
turned off (standby mode), Connect wakes (turns
on) the device.
When a connected INlink-compatible device is
turned on and and you switch to a different video
input source (such as TV), Connect switches to the
device.
To wake INlink-compatible (HDMI CEC) devices:
1 Press INPUT, press
S or T to highlight the
INlink-compatible device you want to wake,
then press ENTER.
2 Press MENU. The on-screen menu opens.
3 Press
W or X to highlight SETTINGS, then press
T or ENTER. The SETTINGS menu opens.
4 Press
S or T to highlight INlink, then press
ENTER. The SETTINGS · INlink menu opens.
5 Press
S or T to highlight Connect, then press
ENTER. A list of HDMI CEC-compatible devices
you have connected opens.
6 Press
S or T to highlight the device you want to
connect to, then press ENTER.
7 Press MENU to return to the previous menu, or
press EXIT to close the menu.