L
Lisa ScottSep 4, 2025
How to adjust color on Insignia NS-32D20SNA14 with good sound?
- MMelissa TaylorSep 4, 2025
If your Insignia LED TV has good sound but poor color, adjust the contrast, color, and brightness settings to improve the picture.
To Next PageTo Next Page
How to adjust color on Insignia NS-32D20SNA14 with good sound?
If your Insignia LED TV has good sound but poor color, adjust the contrast, color, and brightness settings to improve the picture.
What to do if control buttons on Insignia NS-32D20SNA14 do not work?
If the control buttons on your Insignia LED TV do not work, ensure that the Button Lock option is set to Off. If that doesn't work, unplug the power cord, wait a few seconds, then plug the cord back in and turn on your TV.
How to fix no sound on Insignia NS-32D20SNA14 LED TV?
If you have a good picture but no sound on your Insignia LED TV, first increase the volume and ensure that the sound is not muted. Check if headphones are connected, as this will disable the TV speakers. Make sure that the correct audio mode is selected and that the audio cables are connected correctly and securely. Also, ensure your antenna or cable TV is connected correctly and securely. If using an antenna, the digital channel signal may be low. The audio cables you are using may be bad, so try a new set.
What to do if my Insignia NS-32D20SNA14 LED TV has no picture and no sound?
If your Insignia LED TV has no picture and no sound, start by pressing the power button on the TV or remote. Ensure the Audio Only option is set to Off. Check that the video cables are securely connected. Adjust the contrast and brightness. Verify the power cord is plugged in and the correct video input source is selected. Try another channel to rule out station problems. Confirm the incoming signal is compatible and the antenna or cable TV is connected correctly. Finally, check the closed caption settings, as some TEXT modes can block the screen.
How to improve poor picture quality on Insignia LED TV?
To improve poor picture quality on your Insignia LED TV, ensure the room isn't too bright, as light reflecting off the screen can make the picture difficult to see. If an S-VHS camera or camcorder is connected while another device is on, it may cause a poor picture. Try turning off one or more devices.
Why does my Insignia NS-32D20SNA14 LED TV screen only show snow?
If your Insignia LED TV screen only shows snow, try changing the channel to rule out station problems. Ensure the antenna or cable TV is connected correctly and securely. If you're using an antenna, the digital channel signal may be low. If the signal strength is low, adjust the antenna or use a highly directional outdoor antenna or set-top antenna with a built-in amplifier.
Why isn't my device showing up in the INlink Device list on my Insignia NS-32D20SNA14?
If a device isn't showing up in the INlink Device list on your Insignia LED TV, ensure the device is turned on. Verify that the HDMI cable is securely connected to both the TV and the device. Make sure the INlink feature is turned on and that the device is a CEC device (refer to its documentation). If the device is not an Insignia device, it may not be compatible.
Why are some channels not displaying on my Insignia NS-32D20SNA14?
If one or more channels aren't displaying on your Insignia LED TV, ensure the channels are not blocked via parental controls. Also, check if the channels are hidden; they may have been deleted from the channel list. You can tune to the channel by pressing the number buttons or add the channel back to the list. If using a cable or satellite box, use its remote to change channels and ensure you've selected the correct input. If using an antenna, the digital channel signal may be low.
How do I fix the 'No signal' error on my Insignia NS-32D20SNA14 LED TV?
If your Insignia LED TV displays a 'No signal' error message, press the INPUT button to select the correct input for your device or service. If using a cable or satellite box, use its remote to change channels and ensure you've selected the correct input for viewing channels from the box.
Why is picture quality inconsistent on my Insignia NS-32D20SNA14 LED TV?
If the picture quality is good on some channels and poor on others on your Insignia LED TV, the problem may be caused by a poor or weak signal from the broadcaster or cable TV provider. If you connect to cable or satellite TV without a set-top box and experience poor picture quality, you may need to install a set-top box to improve signal reception and picture quality. Contact your cable or satellite TV provider about upgrading to a set-top box.
General| Screen Size | 32 inches |
|---|---|
| Display Technology | LED |
| Refresh Rate | 60Hz |
| Smart TV | No |
| HDMI Ports | 2 |
| USB Ports | 1 |
| Inputs | HDMI, USB, Composite, RF |
| Resolution | 720p (HD) |
| Audio Output | 10W |
| Weight | 10.8 lbs |
