To Next PageTo Next Page
How do I fix the 'No signal' error on my Insignia NS-32D20SNA14 LED TV?
If your Insignia LED TV displays a 'No signal' error message, press the INPUT button to select the correct input for your device or service. If using a cable or satellite box, use its remote to change channels and ensure you've selected the correct input for viewing channels from the box.
Why is my Insignia LED TV remote control not working?
If your Insignia LED TV remote isn't working, ensure the power cord is correctly connected to the TV and a power outlet. Remove any obstructions between the remote and the TV's remote control sensor. Point the remote directly at the sensor. Make sure that you have removed the plastic from the batteries. Verify the batteries are installed correctly or replace dead batteries with new ones.
Why is picture quality inconsistent on my Insignia NS-32D20SNA14 LED TV?
If the picture quality is good on some channels and poor on others on your Insignia LED TV, the problem may be caused by a poor or weak signal from the broadcaster or cable TV provider. If you connect to cable or satellite TV without a set-top box and experience poor picture quality, you may need to install a set-top box to improve signal reception and picture quality. Contact your cable or satellite TV provider about upgrading to a set-top box.
How do I eliminate audio noise on my Insignia NS-32D20SNA14?
To eliminate audio noise on your Insignia LED TV, other devices (such as surround sound receivers, external speakers, fans, or hair dryers) may be interfering with your TV. Try turning off one device at a time to identify the source of the interference. Once identified, move the interfering device further away from the TV.
Why is my Insignia NS-32D20SNA14 screen dark but the sound is working?
If your Insignia LED TV screen is dark, poor, or has no picture but the sound is good, try changing the channel to rule out station problems. Make sure the antenna or cable TV is connected correctly and securely. Adjust the brightness and ensure the correct picture mode is selected. If using an antenna, the digital channel signal may be low, so check the digital signal strength. If the signal strength is low, adjust the antenna or use a highly directional outdoor antenna or set-top antenna with a built-in amplifier. Also, ensure the video cables are connected securely or try a new set of video cables.
Insignia NS-32D20SNA14 LED TV won't turn on: What to do?
If your Insignia LED TV won't turn on, first ensure the power cord is correctly connected to both the TV and a power outlet. If it's connected, unplug the power cord, wait 60 seconds, then plug it back in and try turning on the TV. Also, other devices (like surround sound receivers, external speakers, fans, or hair dryers) may be interfering with your TV. Try turning off one device at a time to determine if one of them is the cause.
Why does my Insignia LED TV have no color or the color is not correct?
If your Insignia LED TV has no color, a dark picture, or incorrect colors, try changing the channel to rule out station issues. Adjust the color settings. Ensure the video cables are connected correctly and securely to your TV. Also, make sure that the antenna or cable TV is connected correctly and securely. If you're using an antenna, the digital channel signal may be low, so adjust the antenna or use a highly directional outdoor antenna or set-top antenna with a built-in amplifier.
How to improve poor picture quality on Insignia LED TV?
To improve poor picture quality on your Insignia LED TV, ensure the room isn't too bright, as light reflecting off the screen can make the picture difficult to see. If an S-VHS camera or camcorder is connected while another device is on, it may cause a poor picture. Try turning off one or more devices.
What to do if my Insignia NS-32D20SNA14 LED TV has no picture and no sound?
If your Insignia LED TV has no picture and no sound, start by pressing the power button on the TV or remote. Ensure the Audio Only option is set to Off. Check that the video cables are securely connected. Adjust the contrast and brightness. Verify the power cord is plugged in and the correct video input source is selected. Try another channel to rule out station problems. Confirm the incoming signal is compatible and the antenna or cable TV is connected correctly. Finally, check the closed caption settings, as some TEXT modes can block the screen.
How to fix no sound on Insignia NS-32D20SNA14 LED TV?
If you have a good picture but no sound on your Insignia LED TV, first increase the volume and ensure that the sound is not muted. Check if headphones are connected, as this will disable the TV speakers. Make sure that the correct audio mode is selected and that the audio cables are connected correctly and securely. Also, ensure your antenna or cable TV is connected correctly and securely. If using an antenna, the digital channel signal may be low. The audio cables you are using may be bad, so try a new set.
General| Screen Size | 32 inches |
|---|---|
| Display Technology | LED |
| Refresh Rate | 60Hz |
| Smart TV | No |
| HDMI Ports | 2 |
| USB Ports | 1 |
| Inputs | HDMI, USB, Composite, RF |
| Resolution | 720p (HD) |
| Audio Output | 10W |
| Weight | 10.8 lbs |
