29
Insignia 32" LED TV
www.insigniaproducts.com
Connecting a basic home theater system
Using digital audio
To connect a basic home theater system using digital audio:
1 Make sure that your TV’s power cord is unplugged and the home theater system is turned off.
2 Connect a digital optical audio cable (not provided) to the DIGITAL OUTPUT (OPTICAL) jack on the side of your
TV and to the optical AUDIO IN jack on the digital home theater system.
3 Plug your TV’s power cord into a power outlet, then turn on your TV and the home theater system.
4 Set the Digital Audio/SPDIF option on the AUDIO menu to PCM. See “Adjusting sound settings” on page 42.
Digital optical audio cable
Home theater system
Side of TV
Digital optical
audio cable
connector
Digital optical
audio jack
On your TV
To Next Page
Loading...
