Insignia NS-32DD220NA16 - Turning Audio Receiver on or off; Displaying a List of Inlink-Compatible Devices

47
NS-24DD220NA16/NS-28DD220NA16/NS-32DD220NA16 24"/28"/32" 720p 60Hz, LED DVD combo TV
www.insigniaproducts.com
Turning Audio Receiver on or off
When INlink is turned on and you have connected an
HDMI CEC-compatible audio receiver to your TV,
turning on Audio Receiver lets you use your TV’s
remote control to control the volume on the audio
receiver.
1 Press TV-MENU.
2 Press
W or X to highlight SETTINGS, then press T
or OK.
3 Press
S or T to highlight INlink, then press OK
or X.
4 Press
S or T to highlight Audio Receiver, then
press OK or X.
5 Press
S or T to highlight On (your TV’s remote
control controls the connected audio receiver’s
volume) or Off (your TV’s remote control does not
control the connected audio receiver’s volume),
then press OK.
6 Press TV-MENU to return to the previous menu, or
press EXIT to close the menu.
Displaying a list of INlink-compatible devices
You can display a list of HDMI CEC devices that are
connected to your TV.
1 Press TV-MENU.
2 Press
W or X to highlight SETTINGS, then press T
or OK.
3 Press
S or T to highlight INlink, then press OK
or
X.
4 Press
S or T to highlight INlink Device Lists, then
press OK or
X. A list of the HDMI CEC-compatible
devices you have connected appears.
5 Press TV-MENU to return to the previous menu, or
press EXIT to close the menu.