How to fix an Insignia NS-39L400NA14 TV remote that is not working?
If your Insignia TV remote isn't working, ensure the power cord is correctly connected to both the TV and the power outlet. Also, make sure there are no obstructions between the remote and the TV's remote control sensor. Point the remote directly at the sensor, verify the batteries are correctly installed, and replace dead batteries with new ones.
What to do if my Insignia NS-39L400NA14 TV has no power?
If your Insignia TV has no power, make sure the power cord is correctly connected to the TV and a working power outlet. Unplug the power cord, wait 60 seconds, then plug it back in and turn on the TV. Other devices may be interfering with your TV, so try turning off one device at a time to determine which one is causing the issue. After determining the interfering device, move it further from the TV.
How to fix Insignia LCD TV remote control that is not working?
If your Insignia LCD TV remote control isn't working, ensure the power cord is correctly connected to both the TV and the power outlet. Remove any obstructions between the remote and the TV's remote control sensor. Point the remote directly at the sensor on the TV's front. Also, confirm that the plastic wrap has been removed from the batteries, that the batteries are correctly installed, or try replacing dead batteries with new ones.
What to do if my Insignia LCD TV has no picture and no sound?
If your Insignia LCD TV has no picture and no sound, try the following: - Press the power button on the TV or remote. - Ensure 'Audio Only' is set to 'Off'. - Check that video cables are securely connected. - Adjust the contrast and brightness. - Make sure the power cord is plugged in. - Select the correct video input source. - Try another channel to rule out station issues. - Verify the incoming signal is compatible. - Ensure the antenna or cable TV is properly connected. - Check closed caption settings to ensure no TEXT modes are blocking the screen.
How to troubleshoot color problems on Insignia LCD TV?
To troubleshoot color problems on your Insignia LCD TV, try changing the channel to rule out station issues. Also, adjust the color settings. Ensure that the video cables and the antenna or cable TV are connected correctly and securely. If you're using an antenna, check the digital channel signal strength, and if it's low, adjust the antenna or use a high-directional antenna with an amplifier.
Why is my Insignia LCD TV screen dark, with poor picture, but good sound?
If your Insignia LCD TV has a dark or poor picture but the sound is good, try changing the channel to rule out station issues. Make sure the antenna or cable TV is connected correctly. Adjust the brightness and ensure the correct picture mode is selected. If using an antenna, check the digital channel signal strength and adjust the antenna or use an amplified antenna if the signal is low. Also, verify that the video cables are securely connected, and try a new set of video cables in case the current ones are bad.
How to remove black bars on Insignia LCD TV?
To remove black bars on your Insignia LCD TV, change the aspect ratio. A growing amount of digital TV and movies are presented in wide screen (16:9).
Why are there dotted lines on my Insignia LCD TV screen?
If you see dotted lines or stripes on your Insignia LCD TV screen, ensure the antenna or cable TV is connected correctly. If you're using an antenna, the digital channel signal may be low, so consider adjusting the antenna or using a high-directional outdoor or set-top antenna with a built-in amplifier. Make sure the video cables are securely connected and try a new set of video cables in case the current ones are bad. Other devices may be causing interference; try turning them off one by one to identify the source and then move the device further from the TV.
What to do if my Insignia LCD TV screen only shows snow?
If your Insignia LCD TV screen only shows snow, try changing the channel to rule out station issues. Ensure that the antenna or cable TV is connected correctly and securely. If you are using an antenna, the digital channel signal may be low. If the signal strength is low, adjust the antenna or use a highly directional outdoor antenna or set-top antenna with a built-in amplifier.
Why is picture quality good on some channels but poor on others on my Insignia LCD TV?
The problem may stem from a weak signal from the broadcaster or cable TV provider. If you're connected to cable or satellite TV without a set-top box and experience poor picture, consider installing a set-top box to improve signal reception and picture quality. Contact your cable or satellite TV provider to inquire about upgrading to a set-top box.
General| Screen Size | 39 inches |
|---|---|
| Display Type | LED |
| Refresh Rate | 60 Hz |
| HDMI Ports | 3 |
| USB Ports | 1 |
| Smart TV | No |
| Backlight Type | LED |
| Inputs | HDMI, USB, Composite, RF |
| Sound Output | 10W x 2 |
Safety tips for TV usage, furniture stability, and preventing tip-overs.
Covers electrical safety, handling, and maintenance to prevent hazards.
TV overview, INlink feature, installing stand, and identifying components.
Instructions for attaching a wall-mount bracket to the TV.
Guides on selecting optimal connection methods for various devices.
Connecting cable/satellite boxes via HDMI, DVI, Component, Composite, and Coaxial.
Connecting DVD/Blu-ray players and game consoles using various cables.
Connecting computers and USB flash drives.
Connecting headphones and home theater systems for audio output.
Guides initial setup for language, time, and TV source selection.
Optimizing picture quality and sound settings for the best experience.
Scanning channels, favorites, labels, signal strength, aspect ratio.
Blocking content, setting passwords, locking buttons, and managing ratings.
Setting closed captioning and managing HDMI CEC devices.
Browsing photos, slideshows, and customizing settings via USB.
Provides guidance on cleaning the TV and operating temperature recommendations.
Offers solutions for video, audio, remote control, and general TV operational issues.
Lists detailed technical data for the TV, including dimensions and ports.
Details the terms, coverage, and limitations of the Insignia TV warranty.
To Next Page