Insignia NS-43D420NA20 User Manual

AUDIO/VIDEO OUT
SOUNDBAR
SOUNDBAR
OPTICAL
AUDIO IN
AUDIO IN
L
R
AUDIO
OPTIONS
HDMI OPTIONS
TV stands
STANDS
1 Align the TV stand screw holes with the holes
on your TV's bottom.
2 Use a Phillips screwdriver and two provided
screws to secure each stand to your TV.
WALL MOUNT
Before you mount your TV, make sure that:
• You remove the stands.
• The wall-mount bracket supports the weight of your TV.
See the instructions that came with your wall mount for more
information about how to correctly mount your TV.
WARNING: Your TV has four VESA mounting holes on the back.
You must secure a wall-mount bracket to all four holes.
If you do not use all four holes, your TV may fall and cause
property damage or personal injury.
Note: Wall-mount screws are not included.
VESA Mounting Pattern
200 x 200 mm
Screws: type M6, 10 mm minimum length
depending on the wall-mount.
HDMI (best video quality)
Note: You can use the
HDMI 1 (ARC) jack to
connect a digital
audio system.
AV (good video quality)
DIGITAL
OPTICAL
OUTPUT
You can use the DIGITAL OPTICAL
OUTPUT
jack or the HDMI 1 (ARC)
jack.
Note: If you need to change the
digital audio format, go to the Home
menu, select Settings, then select
Display & Sounds. Select Audio
Output, then select Digital Audio
Format and change the setting to
PCM or Dolby Digital.
1
QUICK SETUP GUIDE
43" FHD 60Hz
LED TV
NS43D420NA20
USING ANALOG AUDIO
INSTALLING THE STANDS OR A WALL MOUNT
Place your TV face-down on a cushioned, clean surface.
Note: Images do not necessarily represent the exact design of your television.
USING DIGITAL AUDIO
2
Before using your new product, please read these instructions to prevent any damage.
ACCESSORIES
Remote control and two AAA batteries
Power indicator
Remote control
sensor
Coaxial (good video quality)
Connect an antenna to access
live over-the-air TV.
HDHD
MAKING CONNECTIONS
L
R
FEATURES
ANT/CABLE
HDMI3
HDMI2
HDMI1 (ARC)
ANT/CABLE HDMI2 HDMI1(ARC)
USB
DV 5V 05.A
HDMI3
AUDIO OUT
VIDEO L
- AUDIO -
AV IN
R
DIGITAL OPTICAL
OUTPUT
G
A
M
E
A
S
P
E
C
T
C
C
A
C
C
AAA
+
AAA
+
ANT/CABLE HDMI2 HDMI1(ARC)
USB
DC 5V 0.5A
HDMI3
AUDIO OUT
VIDEO L
- AUDIO -
AV IN
R
DIGITAL OPTICAL
OUTPUT
G
A
M
E
A
S
P E
C T
C
C
A
C
C
AUDIO OUT
VIDEO L
- AUDIO -
AV IN
R
STOP
Before using your new product, please read
these instructions to prevent any damage.
Do not plug your power cord in until all other
devices have been connected.
M4 screws
(14 mm length)
(4 pcs.)
Final flat size: 23.38 × 16.52 in. (593.85 × 419.61 mm)
Final fold size: 11.69 × 8.26 in. (296.9 × 209.8 mm)
C
M
Y
CM
MY
CY
CMY
K
NS-43D420NA20_20-0115_QSG_V2_EN_Final.eps 1 2/27/2020 2:56:39 PMNS-43D420NA20_20-0115_QSG_V2_EN_Final.eps 1 2/27/2020 2:56:39 PM

Insignia NS-43D420NA20 Specifications

General

Brand	Insignia
Model	NS-43D420NA20
Category	LED TV
Language	English

Summary

Installing Stands or Wall Mount

Installing TV Stands

Align TV stand screw holes with bottom holes and secure with screws using a Phillips screwdriver.

Wall Mounting TV

Remove stands, ensure bracket supports TV weight, and secure bracket to all four VESA holes.

Connecting Cables and Accessories

HDMI Connection

Connect via HDMI for best video quality, including ARC for digital audio systems.

AV Connection

Connect via AV for good video quality.

Audio Connections

Connect audio using Analog, Digital Optical, or HDMI 1 (ARC) for various audio outputs.

Coaxial Connection

Connect an antenna via coaxial for live over-the-air TV.

Initial TV Setup and Remote Usage

Powering On TV

Plug in the power cord, install batteries in the remote, press the power button, and follow on-screen instructions.

Remote Control Functions

Guide to using Power, Input, Navigation, Menu, Volume, Channel, and other remote buttons for TV operation.

Universal Remote Control Setup

Universal Remote Codes

Provides common codes for programming universal remotes to control the Insignia TV.