Insignia NS-40D510NA19

To Next Page

QUICK SETUP GUIDE

40" 1080p

60Hz LED TV

NS40D510NA19

ST4 × 14 mm screws

FEATURES

Your TV has four VESA mounting holes on

the back. If you attach a wall-mount

bracket to the back of your TV, the bracket

must be securely attached, using all

four holes. If you do not use all four

mounting holes, your TV may fall and

cause property damage or personal injury.

See the documentation that came with

your wall-mount for complete mounting

instructions.

START HERE

How do I attach the stand to my TV? (not for wall mounting)

You’ll need: Soft surface and Phillips screwdriver

Place your TV face-down on a cushioned, clean surface.

Align the screw holes on the TV stands with the holes on the bottom of your TV, then secure each stand to your TV with

two of the provided screws.

Before using your new product, please read these instructions to prevent any damage.

INCLUDED ACCESSORIES

Remote control and two AAA batteries

TV stands

ST4 x 14 screws (14 mm length) (4 pcs.)

WALL MOUNT

How do I prepare my TV for wall mounting? (not for use with a TV stand)

You’ll need: Soft surface and Phillips screwdriver

Before you mount your TV, make sure that:

• You remove the stand legs

• The bracket supports the weight of your TV.

A Carefully place your TV face-down on a cushioned, clean surface.

B See the instructions that came with your wall mount for more information about

how to correctly mount your TV.

Note: Images do not necessarily represent the exact design of your television.

Power indicator

Remote control sensor

FIND YOUR USER GUIDE ONLINE!

1 Go to www.insigniaproducts.com.

2 Use the search bar to nd NS-40D510NA19.

3 Select Support & Downloads.

4 Next to User Guide, select the language you want.

STOP

Do not plug your power cord in until all

other devices have been connected.

This apparatus is intended to be supported by a UL Listed

Wall Mount Bracket, marked with the minimum weight of 8 kg.

NS-40D510NA19

VESA Mounting Pattern

VESA mount (mm): 200 x 200 mm - M6, 10mm length

USB

ANT/CABLE

HDMI

2HDMI 3

SERVICE

HDMI 1/ARC

VIDEO

L R

AUDIO

AV IN

DIGITAL

OUTPUT

(OPTICAL)

AUDIO OUT

HDMI 2 HDMI 3

VIDEO

L R

AUDIO

AV IN

ANT/CABLE

MAKING CONNECTIONS

How do I watch TV (cable, satellite, or antenna) or connect a device, such as a DVD or Blu-ray disc player,

game console, or tablet?

WHICH CABLES DO YOU HAVE?

HDMI

(BEST)

Best video quality

AV (GOOD)

COAXIAL (GOOD)

Multi-purpose jacks: You can plug any device that uses HDMI into either HDMI jack.

However, certain devices must be connected to the HDMI 1(ARC) jack. See the instructions

that came with your ARC device for more information.

AUDIO/VIDEO OUT

HDMI 1/ARC

AAA

CMY

NS-40D510NA19_18-0396_QSG_V1_ENG.ai 1 6/29/2018 10:28:51 AMNS-40D510NA19_18-0396_QSG_V1_ENG.ai 1 6/29/2018 10:28:51 AM

FINAL

FOR PRINT

Need help?

Do you have a question about the Insignia NS-40D510NA19 and is the answer not in the manual?

Summary

Start Here: Attaching TV Stand

Attaching the TV Stand

Instructions for attaching TV stands to the TV using screws.

Wall Mount Preparation

Preparing for Wall Mounting

Steps to prepare the TV for wall mounting, including stand removal.

Making Connections

Connecting for Viewing

Connect cable, satellite, antenna, or media devices using HDMI or AV inputs.

Cable Connection Options

Guidance on selecting appropriate cables for device connections.

Connecting Audio Devices

Connecting to External Speakers

Instructions for connecting the TV to external speakers via digital or analog audio out.

Turning On Your TV

Powering On the TV

Steps to plug in the power cord and install batteries for the remote.

Using Your Remote Control

Remote Control Functions

Explanation of the TV remote control buttons and their functions.

Universal Remote Control Codes

List of codes for programming universal remotes to control the TV.

This document describes the Insignia 40" 1080p 60Hz LED TV, model NS-40D510NA19, a television designed for home entertainment. It provides instructions for initial setup, connecting external devices, and basic operation.

Function Description:

The Insignia NS-40D510NA19 is a 40-inch LED television capable of displaying 1080p resolution at a 60Hz refresh rate. It serves as a central display for various video sources, including broadcast television (cable, satellite, or antenna), DVD/Blu-ray players, game consoles, and other multimedia devices. The TV supports both stand-alone placement and wall mounting. It includes a remote control for convenient operation and offers multiple input/output options to accommodate a range of peripheral devices.

Important Technical Specifications:

Display Size: 40 inches
Resolution: 1080p (Full HD)
Refresh Rate: 60Hz
VESA Mounting Pattern: 200 x 200 mm, M6 screws, 10mm length. This standard ensures compatibility with a wide range of wall mount brackets.
Power Input: Standard AC power.
Included Accessories: Remote control, two AAA batteries, TV stands, and four ST4 x 14 mm screws (14 mm length) for stand attachment.

Input/Output Ports:

The TV is equipped with a comprehensive set of ports to facilitate various connections:

HDMI (BEST): Three HDMI ports are available for the best video quality. One of these, HDMI 1(ARC), supports Audio Return Channel (ARC), which allows for two-way communication with ARC-compatible audio devices (e.g., soundbars, AV receivers) for simplified audio setup.
AV In (GOOD): Includes L-AUDIO-R (left/right audio) and VIDEO (composite video) inputs for connecting older devices that use RCA connectors.
Digital Audio Out (Optical): An optical audio output for connecting to digital audio receivers or soundbars.
Ant/Cable: A coaxial input for connecting an antenna or cable TV signal.
USB: A USB port, primarily for photo slideshows.
Service Port: A dedicated port for service and maintenance.
Input (General): A general input port, likely for additional analog audio/video.

Usage Features:

Initial Setup:

Stand Attachment: For stand-alone use, the TV stands are attached to the bottom of the TV using the provided ST4 x 14 mm screws. A soft, clean surface is recommended for this process.
Wall Mounting: If wall mounting, the stands must be removed. The TV requires a UL Listed Wall Mount Bracket with a minimum weight support of 8 kg. The VESA mounting pattern is 200 x 200 mm with M6, 10mm length screws. It is crucial to use all four VESA mounting holes for secure attachment to prevent property damage or personal injury.
Power Connection: The TV is powered by a standard AC power cord, which should only be plugged in after all other devices are connected.

Remote Control Functions (NS-RC4NA-18):

The included remote control provides full functionality for operating the TV:

Power: Turns the TV on or off.
Input: Opens the input source list to select between TV, HDMI1, HDMI2, AV, and USB (Photos).
Numbers (0-9): Enters channel numbers or parental control passwords. Also used for entering digital sub-channel numbers (e.g., 4.1).
Recall: Returns to the previous channel.
Favorite: Opens the Favorite Channel List.
Menu: Opens the TV menu.
Enter: Confirms selections or changes.
Exit: Closes the TV menu.
Info:* Opens a TV status banner.
ACC (Accessibility): Opens the Accessibility menu.
CC (Closed Captioning): Turns closed captioning on or off.
Volume (+/-): Adjusts the volume.
Mute: Mutes the sound.
Channel (+/-): Changes TV channels.
Aspect: Changes how the picture is displayed on the screen.
Game: Adjusts the picture for the ultimate gaming experience.
Sleep: Sets the sleep timer.
Picture: Selects the video mode.
Media Controls (Play/Pause, Stop, Rewind, Fast Forward): Controls HDMI-CEC devices (INlink) and USB photo slideshows.
Audio: Selects the audio mode.
Arrows: Navigates on-screen menus.

Connecting Audio Devices:

Digital Audio: For connecting to external speakers via the Digital Optical Output, the TV's Audio Format/Audio Delay setting in the Audio menu should be set to PCM.
Analog Audio: For connecting to external speakers (e.g., soundbars) via the L-AUDIO-R outputs, connect to the corresponding AUDIO IN ports on the external device.

Universal Remote Control Compatibility:

The manual provides a list of common universal remote control codes for various providers (AT&T U-verse, Cablevision, Charter, Comcast, Cox, DirecTV, Dish Network, RCA, Rogers, Time Warner, Verizon) to program a universal remote to control the Insignia TV. An up-to-date list of codes is available on www.insigniaproducts.com/remotecodes.

Maintenance Features:

User Guide: An online user guide is available at www.insigniaproducts.com by searching for NS-40D510NA19. This resource provides detailed information on operation and troubleshooting.
Support Community: The Insignia Support Community (http://community.insigniaproducts.com/) offers helpful information from other Insignia TV owners.
Customer Service: For customer service, users can call 1-877-467-4289 (U.S./Canada) or 01-800-926-3000 (Mexico).
Power Cord Warning: Users are advised not to plug in the power cord until all other devices have been connected to prevent damage.
Cleaning: While not explicitly detailed in this quick setup guide, general TV maintenance typically involves cleaning the screen and exterior with a soft, dry cloth.

Warranty:

The product comes with a one-year limited warranty. Details are available at www.insigniaproducts.com.

This television is designed for ease of use and offers a range of features to enhance the viewing experience, from its Full HD display to its versatile connectivity options.