11
NS-40DR420NA16/NS-48DR420NA16
www.insigniaproducts.com
TV components
Your TV has built-in controls for adjusting basic
settings and several sets of jacks for connecting
devices to your TV.
This section contains information about:
•Package contents
•Front features
• Buttons
•Side jacks
•Back jacks
• Remote control
Package contents
• 40" or 48" LED TV
• Remote control and batteries (2 AAA)
•TV stands (2)
•Screws (4)
•Power cord
• Quick Setup Guide
• Important Information
Front features
Buttons
The controls on your TV enable you to perform simple
functions, but are not a substitute for the remote
control. Your TV has seven buttons on the bottom
edge of the screen. From left to right, they perform
the following functions:
# Item Description
1
Remote control
sensor
Receives signals from the remote
control. Do not block.
2
Status indicator See Status light on page 46.
# Item Press to...
1 INPUT
Select among the configured TV
inputs. Each press moves down
one item. Also, while the Input
panel is visible, the CH+ and CH–
buttons move the highlight up
and down. Pausing for a few
moments selects the highlighted
input.
2
MUTE Mute or unmute the sound.
3 VOL+/VOL–
Press to increase or decrease the
volume.
4
CH+/CH–
Go to the next or previous
channel in the channel list. For
more information, see Watching
broadcast TV channels on
page 46.
OR
Move the highlighted item up
down in the current menu.
5
(
power)
Press to turn your TV on or off
(standby mode).
Warning: When your TV is off,
power still flows through it. To
completely disconnect power,
unplug the power cord.
To Next Page
Loading...
