60
40"/48" 1080p, 60Hz, LED Insignia Roku TV
www.insigniaproducts.com
Change sound effects volume
Sound effects are the noises your TV makes to let you know it received your command. You can change the volume of
sound effects or turn them off.
To adjust the sound effects volume, in the Home screen menu, navigate to Audio>Menu volume. Navigate to the right
and then change the setting to High, Medium, Low, or Off.
Configure power settings
Power settings let you set up your TV so that it turns on to the location you choose. Power settings also help your TV
save energy by automatically turning it off under certain conditions.
Power on settings
Power on settings tell your TV what to do when you turn on the power. To configure the power on settings, from the
Home screen menu, navigate to Settings > System > Power > Power on. Highlight the power on location from the list,
and then press OK to select it.
Auto power off settings
To help you save energy, your TV can automatically turn itself off after a period of inactivity or a period during which no
signal has been detected. It is factory-configured to do both of these things, but you can change these settings if
needed.
To configure automatic power off, from the Home screen menu navigate to Settings > System > Power >Auto power
off. In the Power settings screen, highlight the following options and press OK to turn them on or off:
• After 15 minutes of no signal—If no signal is detected on a TV input for 15 minutes, your TV automatically powers
off.
• After 4 hours of no interaction—If no remote control or panel button is pressed for 4 hours and your TV is not
displaying a TV signal or streaming a video, your TV is automatically powered off.
To Next Page
Loading...
