Lighting your cooler
Press the light button to turn the interior light on and off.
Using the adjustable shelves
All of the shelves have tabs to engage the cabinet on both sides.
Any of the shelves can be removed to accommodate larger beverages.
To remove a shelf:
1. Remove all bottles from the shelves.
2. Lift the shelf upward and then gently pull out the shelf.
To replace a shelf:
• Place the sides of the shelf back onto the supporting guides of the cabinet and push back
until the shelf tabs slide into place.
CAUTION: Make sure that the tabs are firmly engaged in the supporting guides before storing
any beverages.
Arranging your beverages
In order to maintain good air circulation in the cooler, do not let the beverages touch the
back of the cooler.
Filling your beer and beverage cooler
The following illustrations are provided to show the best way to fill your cooler for maximum storage:
Maintaining your beverage cooler
Your cooler is designed for year-round use with only minimal cleaning and maintenance.
When you first receive it, wipe the cabinet with a mild detergent and warm water, then wipe dry with a
dry cloth. Do this periodically to keep your cooler looking new.
CAUTION: To prevent damage to the finish, do not use:
Gasoline, benzine, thinner, or other similar solvents.
Abrasive cleaners.
Cleaning the interior of your cooler
1. Turn off the cooler and unplug it from the wall outlet.
2. Remove all beverages.
To Next Page
Loading...
