9. Attach the lower hinge and leveling feet to the opposite sides of the beverage cooler.
10. Replace the glass door, then reinstall the upper hinge and axle sleeve. Make sure that you align
the door and check the tightness of the door gasket.
11. Reinstall the rivets and hole cap.
12. Adjust the leveling feet to level the cooler.
Grounding requirement
This cooler must be grounded. This cooler is equipped with a cord having a grounding wire with a
grounding plug. The plug must be inserted into an outlet that is properly installed and grounded.
Consult a qualified electrician or service person if the grounding instructions are not completely
understood, or if doubt exists as to whether the cooler is properly grounded.
WARNINGS:
Improper use of the grounding plug can result in a risk of electric shock.
Do not, under any circumstances, cut or remove the third ground prong from the supplied power
cord.
Connecting to power
To Next Page
Loading...
