14
Insignia NS-BRDVD4/NS-BRDVD4-CA Blu-Ray Disc Player
www.insigniaproducts.com
Connecting a TV using an HDMI cable (best)
To connect a TV using an HDMI cable:
• Connect an HDMI cable to the HDMI jack on the back of your
player and to the HDMI IN jack on the TV.
Connecting a TV using a component video cable (better)
To connect a TV using component cables:
1 Connect a component video cable to the COMPONENT VIDEO OUT
jacks on the back of your player and to the COMPONENT VIDEO IN
jacks on the TV.
Notes
Only the HDMI is capable of 1080p video output and the highest
definition audio codecs.
An HDMI cable carries both video and audio. If you want to use
TV speakers, you do not need to make an audio connection if you
are using an HDMI cable. If you want to use an HDMI-capable
audio receiver, connect an HDMI cable between your player and
the HDMI input on the receiver.
Notes
High definition video (up to 1080i) is supported with a
component video cable.
TV
Back of player
HDMI cable
Audio cable
Back of player
Component video cables
TV
NS-BRDVD4-BRDVD4-CA_10-0919_MAN_V5.fm Page 14 Friday, August 13, 2010 11:33 AM
To Next Page
Loading...
