42
Insignia NS-BRDVD4/NS-BRDVD4-CA Blu-Ray Disc Player
www.insigniaproducts.com
To enable InLink:
1 Press ENTER. The Settings menu opens.
2 Press or to select System, then press ENTER. The System menu
opens.
3 Press or to select InLink, then press ENTER.
4 Press or to select On (to allow mutual control of devices through
HDMI), then press ENTER.
5 Review the User Guide for your TV for CEC setup information.
6 Press to go to the previous menu.
Downloading player update software
To download player update software:
1 Press ENTER. The Settings menu opens.
2 Press or to select System, then press ENTER. The System menu
opens.
3 Press or to select Update Via Network, then press ENTER.
4 Follow the on-screen instructions for updating the software.
5 Press to go to the previous menu.
NS-BRDVD4-BRDVD4-CA_10-0919_MAN_V5.fm Page 42 Friday, August 13, 2010 11:33 AM
To Next Page
Loading...
