CEILING MOUNT INSTRUCTIONS
1. Determine where you want to mount the speakers. The speakers must be mounted in areas
where there are no obstructions like studs (joists). Tap the ceiling to find a “hollow” space, or use
a stud finder to locate the studs.
Note: Make sure that your speaker wires are long enough to run from the speakers to your audio
equipment. If you plan to run the speaker wires through the walls or ceiling, the wires must be UL
or CL rated to ensure your safety and to meet building code compliance.
2. Position the cardboard mounting template on the ceiling where you want to mount a speaker,
then trace around the template.
3. Drill a small hole in the center of the template outline you drew on the ceiling.
4. Bend a piece of coat hanger wire, then insert the wire into the hole. Slowly rotate the wire to
check for any obstructions. If you find an obstruction, patch the hole and find a new location for
the speaker.
To Next Page
Loading...
