EasyManua.ls Logo

Insignia NS-PCS21 User Manual

Insignia NS-PCS21
2 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
Off Max
BassVolume
Before using your new product, please read these
instructions to prevent any damage.
Quick Setup Guide I NS-PCS21 2.1 computer speaker package
Congratulations on your purchase of a
high-quality Insignia product. Your
NS-PCS21 is designed for reliable and
trouble-free performance.
Package contents
Satellite speakers (2) AC adapter
• Subwoofer (1) Quick Setup Guide
Features
Right speaker Right speaker
(front) (back)
1 On/O,
Volume control
2 Headphone
output jack
3 Bass control
4 Auxiliary input
jack
Rotate clockwise to turn on the speaker system
or to increase volume. Rotate counter-clockwise
to turn the speaker system o or to reduce
volume.
Connect your favorite headphones to this jack.
They will mute the speaker system automatically.
The master volume control can then be used to
turn up or down the volume to your
headphones.
Rotate clockwise to increase bass output. Rotate
counterclockwise to decrease bass output.
Connect a second source, such as an MP3 player.
This connection will override your computer
source connection while it’s plugged in.
Setting up your speaker system
Positioning your speaker system
1 Place the speakers on opposite sides of the device
they are connected to and as far apart as possible.
2 Place the subwoofer on the oor.
Connecting to a computer
1 Make sure that the computer and your speaker
system are turned o and unplugged from the
power outlet.
2 Plug the cable with the green plug on the right
speaker into the audio out jack on the computer
(this jack is usually green).
3 Plug the cable with the red plug on the right
speaker into the jack on the subwoofer.
4 Turn on the computer and your speaker system.
Connecting to portable audio devices
1 Make sure the portable audio device and your
speaker system are turned o and unplugged.
2 Plug the green audio cable attached to the speaker
into your audio device.
3 Plug the cable with the red plug on the right
speaker into the jack on the subwoofer.
4 Plug the black plug from the AC adapter into the
back of the subwoofer and the other end into a wall
outlet or power strip.
5 Turn on the speaker system and your device.
Note: Portable audio devices can also be connected
to the auxiliary input jack on the back of the right
speaker (cable not included).

Questions and Answers:

Insignia NS-PCS21 Specifications

General IconGeneral
BrandInsignia
ModelNS-PCS21
Total Output Power20 Watts
Signal-to-Noise Ratio70 dB
Input Impedance4 Ohms
Input Sensitivity500mV
Weight (Each Speaker)3.5 lbs
Power SourceAC

Summary

Setting Up Your Speaker System

Positioning Speakers and Subwoofer

Place speakers on opposite sides of the device and the subwoofer on the floor for optimal sound.

Connecting to Devices

Connect to Computer

Plug green cable into computer's audio out, connect subwoofer cables, and then power.

Connect to Portable Audio Devices

Plug green cable into device audio out, connect subwoofer cables, and then power.

Troubleshooting Speaker Issues

Speaker System Will Not Turn On

Check power button, cord connection to outlet, and test the power outlet itself.

Speaker Does Not Produce Sound

Verify connections, check mute/volume, and test with another audio device.

Sound is Distorted

Adjust the master volume control and output device volume settings.

Sound Coming From One Speaker

Balance computer audio levels and reseat the audio connector in the computer's jack.

Important Safety Information

General Safety Guidelines

Read instructions, avoid water, clean with dry cloth, ensure ventilation, and keep away from heat sources.

Electrical Safety and Care

Protect power cord, use specified accessories, unplug during storms, and refer servicing to qualified personnel.

Related product manuals