EasyManua.ls Logo

Insignia NS-PCS219 - User Manual

Insignia NS-PCS219
2 pages
Save Page as PDF
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
PACKAGE CONTENTS
• Stereo speakers (2)
• AC adapter (100 - 240V)
• Quick Setup Guide
FEATURES
• Stereo speakers (2) for immersive sound
• Compatible with computers, tablets, phones, and
any device with a 3.5 mm audio jack
• Speaker controls for easy power and volume level
adjustments
• Headphone jack for private listening
• Sleek appearance for a modern look to accent your
computer
SETTING UP YOUR SPEAKER
SYSTEM
Positioning your speaker system
• Place the speakers on opposite sides of the
device they are connected to and as far apart as
possible.
Connecting to a computer
1 Make sure that the computer and your speaker
system are turned o and unplugged from the
power outlet.
2 Plug the cable with the green plug on the right
speaker into the audio out jack on the computer.
3 Connect the power plug to the AC power
adapter, then plug the adapter into a wall
outlet or power strip.
4 Turn on the computer and your speaker system.
Connecting to portable audio devices
1 Make sure that the portable audio device and
your speaker system are turned o and
unplugged.
2 Plug the green audio cable attached to the
speaker into your audio device.
3 Connect the power plug to the AC power
adapter, then plug the adapter into a wall
outlet or power strip.
4 Turn on the portable audio device and your
speaker system.
Before using your new product, please read
these instructions to prevent any damage.
QUICK SETUP GUIDE
Powered
Stereo
Speakers
NS-PCS219
1 Power button
2 Power LED
3 Headphone
output jack
4 Master
volume
control
Press to turn your speaker on
or o.
Lights blue when power is on.
Connect headphones to this
jack. They will mute the
speaker system automatically.
The master volume control can
then be used to turn up or
down the volume to your
headphones.
Rotate clockwise to turn the
volume up or
counterclockwise to turn the
volume down.

Questions and Answers

  • A
    Alice SolomonJul 27, 2025
    What to do if Insignia Speakers do not produce sound?
    • B
      bennettamandaJul 27, 2025
      If your Insignia speakers aren't producing sound, ensure the power is on by pressing the power button on the right speaker, verifying the blue power LED is lit. Check that the power cord is connected to a working power outlet. Confirm the speakers are correctly connected, and the audio device isn't muted or set to a low volume. Try connecting the speakers to another audio device to isolate the problem.
  • A
    alexandermichaelAug 3, 2025
    How to turn on Insignia NS-PCS219?
    • G
      Gina CastilloAug 3, 2025
      To turn on your Insignia speakers, press the power button located on the right speaker. The power LED should light up blue when the speaker system is on. Also, ensure that the power cord is securely connected to a functioning power outlet. Test the outlet to confirm it's supplying power.
  • V
    vincentprattAug 11, 2025
    Why is the sound distorted on my Insignia NS-PCS219 Speakers?
    • K
      Karen WarrenAug 11, 2025
      For the best sound quality with your Insignia speakers, adjust the volume on the speakers to its lowest setting. Then, increase the volume to a high level (75-100%) on your computer or source device. Finally, increase the speaker volume to your desired level. If you hear a constant noise, try moving the speakers away from other devices or cables.
  • A
    Amanda FisherAug 19, 2025
    What to do if sound is coming from only one Insignia speaker?
    • W
      Willie AndrewsAug 19, 2025
      If sound is only coming from one of your Insignia speakers and your speaker system is connected to a computer, adjust your computer’s audio levels to balance the sound output. Additionally, try reseating the audio connector into the audio output jack of your audio device.

Summary

Product Features

Package Contents

Setting Up Your Speaker System

Positioning Your Speaker System

Place speakers on opposite sides of the device they are connected to and as far apart as possible.

Connecting to a Computer

Plug the green audio cable into the computer's audio out jack and connect power.

Connecting to Portable Audio Devices

Plug the green audio cable into your audio device and connect power.

Power Supply Specifications

Troubleshooting

Important Safety Information

Legal Notices

Insignia NS-PCS219 Specifications

General IconGeneral
BrandInsignia
ModelNS-PCS219
Product TypeSpeakers
Configuration2.1
Frequency Response40Hz - 20kHz
Input Impedance4 Ohms
Input Sensitivity500 mV
ControlsVolume, Bass
ColorBlack
Signal-to-Noise Ratio70 dB
Driver Size (Satellites)3 inches
Connector Type3.5mm

Related product manuals