Insignia NS-CLLT01 - Connecting Power and Setting Clock; AC Adapter Connection Guide; Setting the Clock Time

9
Insignia NS-CLLT01 Digital FM Clock Radio with Dock for iPhone5
www.insigniaproducts.com
Connect the AC adapter
Make sure that the AC power outlet matches the AC adapter’s power
specifications (120 V ~ 60 Hz) prior to plugging in the adapter.
1 Plug the small DC power connector into the DC IN 5V jack on the back
of your clock radio.
2 Plug the other end of the AC power adapter into a power outlet.
Set the clock
1 In standby mode (the time is shown on the display), press and hold the
TIME SET button on the top of your clock radio for three seconds.
The hour and minutes digits blink.
2 Press the - HOUR button to set the correct hour.
3 Press the MIN - button to set the correct minutes.
4 Press the TIME SET button to confirm.
Hour digits
Minutes digits
PM indicator
NS-CLLT01_14-0316_MAN_V4_ENG.fm Page 9 Wednesday, May 28, 2014 6:40 AM