6
NS-CT1DC8
www.insigniaproducts.com
Using your dash camera
Charging your dash camera
1 To charge your dash camera, plug the USB cable (provided) into the mini
USB jack on the top of the dash camera.
2 Plug the other end of the USB cable into a car charger (provided).
3 Plug the car charger into the cigarette lighter. Your dash camera will begin
charging when you turn on your car.
Turning on your dash camera
1 Press the power button to turn on your dash camera.
2 Press and hold the power button to turn off your dash camera.
Initially setting up your dash camera
When your dash camera is powered on for the first time, you will be
prompted to enter basic setup information, such as Language, Year,
Month, Day, Time Zone, Daylight Saving Time, and Time.
This information is required so that file names will be created correctly and
time stamps will be accurate.
Subsequent startups will go directly to the video screen.
SETTING OPTIONS
Resolution 1080p 1920 x 1080 - 30 fps
720p 1280 x 720 - 60 fps
WVGA 848 x 480 - 30 fps
VGA 640 x 480 - 30 fps
WDR Wide Dynamic Range (automatically adjusts the exposure)
Recycle record Sets the loop video duration. Settings include Off>1 min>3 mins>
5 mins. When the MicroSD memory card is full, the oldest unlocked
video will be deleted automatically. The event will not be deleted.
Record audio Turns the sound recording on or off.
Date stamp Sets the current date and time.
Exposure Sets the white balance value of the video recordings.
Language Sets the language of the OSD screens.
Speaker volume Sets the initial button sound feedback volume.
Beep sound Turns the button sound feedback on or off.
Auto display off Sets the automatic power-off timer. Settings include On>1 min>3
mins>5 mins.
Format Formats a new SD memory card.
Note: Erases all your stored data. Back up your data before proceeding.
NS-CT1DC8_17-0513_MAN_V1_ENG.fm Page 6 Tuesday, December 12, 2017 11:25 AM
To Next Page
Loading...
Need help?
General
