What to do if my Insignia Digital Photo Frame won't turn on?
If your Insignia Digital Photo Frame isn't turning on, make sure the power adapter is securely connected to the photo frame and that the power switch is on. Check the power adapter connections, and then switch the power on.
Why can't I view my pictures on Insignia Digital Photo Frame?
If you've inserted a memory device into your Insignia Digital Photo Frame but can't see your pictures, here are a few things to check: 1. Ensure the memory device is a supported format and that the files are JPEG image files. 2. Turn the frame off, ensure the memory device is fully and correctly inserted, and then turn it back on. Wait a few seconds to see if your pictures appear. 3. Try formatting the device in FAT32 format. Remember that formatting will erase all files, so back them up first. 4. Some digital cameras save images in formats other than JPEG. Check your camera's manual for details.
What to do if Insignia Digital Photo Frame displays some pictures slower than others?
If your Insignia Digital Photo Frame is displaying some pictures slower than others, it might be due to the picture resolution. Higher resolution pictures take longer to load. Try using lower resolution pictures or down-sampling (compressing or resizing) them.
What to do if the photo file does not play on Insignia Digital Photo Frame?
If a photo file isn't playing on your Insignia Digital Photo Frame, the images on the card may be in an incompatible format. Make sure that there is at least one supported image file (JPEG) on the memory card.
General| Screen Size | 8 inches |
|---|---|
| Aspect Ratio | 4:3 |
| USB Port | Yes |
| Wi-Fi | No |
| Power Source | AC Adapter |
| Dimensions | 8.5 x 6.5 x 1.5 inches |
| Weight | 1.1 pounds |
| Resolution | 800 x 600 |
| Supported File Formats | JPEG |
| Memory Card Support | SD |
Instructions for preparing the remote control for use by removing the battery tab.
Steps to attach the stand to the photo frame for portrait or landscape viewing.
Instructions for starting a slideshow automatically upon inserting media.
To Next Page