EasyManuals Logo

Insignia NS-DWRF2SS3 User Manual

Insignia NS-DWRF2SS3
20 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #11 background imageLoading...
Page #11 background image
www.insigniaproducts.com
11
Front Control Dishwasher
The amount of detergent required depends on the water hardness. Refer to the following table for the recommended
amount.
Filling the rinse aid dispenser
Your dishwasher is designed to use a liquid rinse aid. The use of a rinse aid greatly improves drying performance after the
final rinse. Do not use a solid or bar-type rinse aid. Under normal conditions, the rinse aid will last approximately one
month. Try to keep the dispenser full, but do not overfill it.
1 Turn the rinse aid dispenser cap 1/4 turn counterclockwise and lift it out.
2 Add rinse aid until the liquid touches the indicated fill level. Do not overfill, since this can cause oversudsing. Wipe up
any spills with a damp cloth. The dispenser holds enough for 30 to 140 washes, depending on the dial setting.
3 Adjust the rinse aid dial, if necessary. See Using rinse aid
on page 12 for information on proper adjustment of the rinse
aid setting.
4 Replace the cap and turn it 1/4 turn clockwise.
Cycle Soft Water
(0-3 grains)
Medium Hard Water
(4-8 grains)
Hard Water (9-12
grains)
Very Hard Water (over
12 grains)
Normal
Heavy
Express
2 tsp.
(main wash
cup 1/4 full)
5 tsp.
(main wash cup fill to
line above regular)
8 tsp.
(main wash cup
completely full)
Main wash cup
completely full (water
softener recommended)
Dispenser cap
More rinse aid
Less rinse aid

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Insignia NS-DWRF2SS3 and is the answer not in the manual?

Insignia NS-DWRF2SS3 Specifications

General IconGeneral
BrandInsignia
ModelNS-DWRF2SS3
CategoryDishwasher
LanguageEnglish

Related product manuals