www.insigniaproducts.com
5
Front Control Dishwasher
Installing and setting up your dishwasher
1 Water supply temperature should be between 120° ~ 149° F
(49° ~ 65° C).
2 Dispose of the discarded appliance and packing material properly.
3 The dishwasher must be electrically grounded or it can result in a risk of electric shock.
4 If there is any damage to the dishwasher, please contact Customer Service. Do to attempt to repair or replace any part
by yourself.
For information on installing and setting up your dishwasher, refer to the Installation Guide provided.
Before using your dishwasher
1 Remove the interior packing.
2 Remove all twist-ties and tape from the racks and spray arms.
3 Clean the interior surface with lukewarm water using a soft cloth.
Finding a suitable location
• This dishwasher is designed to be built-in.
• The dishwasher door must be able to fully open.
Providing a proper power supply
Check your local power source. This dishwasher requires a 120 V, 60 Hz power supply.
Refer to the Installation Guide for additional information.
Understanding your dishwasher’s features
How your dishwasher cleans
The dishwasher fills with water, covering the filter area at the bottom. Water is then pumped through the various filter and
spray arms, spraying a mixture of hot water and detergent against the soiled surfaces of your dishes and silverware. Soil
particles are separated and go down the drain as the dirty water is drained and replaced with clean water. The number of
water fills is determined by the cycle selected.
Wash cycle selections
Cycle times are approximate and will vary with options selected. Hot water is necessary to activate dishwasher detergent
and melt fatty food soils.
An automatic sensor checks the incoming water temperature and, if it is not hot enough, the timer will be delayed to allow
for the water to heat for the main wash of all cycles.
Filter system
Your dishwasher has a multiple filter system which includes four separate filter meshes. It separates dirty water and clean
water into different chambers. The multiple filter system helps your dishwasher to get better performance with less water
and less energy.
Smart wash system
Your dishwasher has a smart wash system, under the normal wash, which selects the wash cycle based on how large and
how soiled the load, permitting your dishwasher to clean more efficiently every time. When a partial load of lightly soiled
dishes is placed in the unit, a short wash cycle is automatically selected. When a full load of heavily soiled dishes is placed
in the unit, a heavy wash cycle is automatically selected.
To Next Page
Loading...
Need help?
General
