Insignia NS-DXA1-APT User Manual

9
Converter Box with Analog Pass Through
www.insignia-products.com
Setting the clock
Normally, your converter box uses time signals
sent from DTV channels to automatically set the
clock. If the time is not set automatically, you can
set the clock by selecting the time zone.
To set the clock:
1 Press MENU. The menu system opens.
2 Press
or to select Option, then press
or . The Option menu opens.
3 Press or to select Clock, then press
or .
4 Press or to select the time zone, then
press
to select Day Light Saving.
5 Press or to select On, Off, or Auto. If
you select Auto, your converter box uses
time signals from DTV channels to determine
the correct setting.
Selecting the TV type
Yo u s e t t he T V t y p e ( a s p ec t r a t i o ) t h e f i r s t t i me
your turned on your converter box. You can
change the TV type, if necessary.
To select the TV type:
1 Press MENU. The SETUP menu opens.
2 Press or to select OPTION, then press
or . The
OPTION menu opens.
3 Press or to select TV Aspect Ratio,
then press or .
4 Press or to select channel 4:3 (standard
TV screen) or 16:9 (wide-screen TV screen),
then press .
Selecting the TV program aspect ratio
Yo u c a n s e l e c t t h e a s p e c t r a t i o f or t h e c u r r e n t T V
program.
To select the TV program aspect ratio:
1 Press MENU. The
SETUP menu opens.
2 Press or to select OPTION, then
press or . The
OPTION menu opens.
3 Press or to select Aspect Ratio, then
press or .
4 Press or to select an aspect ratio, then
press . The options you can choose vary,
depending on the TV type you selected.
Note
If the aspect ratio is set by the program and cannot
be changed, this option will be grayed and display
the message “Set by Program.”

Insignia NS-DXA1-APT Specifications

General

Brand	Insignia
Model	NS-DXA1-APT
Category	TV Converter Box
Language	English