9
www.insigniaproducts.com
16-Cycle 4.4 Cu. Ft. Front Load Electric Dryer
INSTALLATION INSTRUCTIONS
Understanding control panel indicators
8
Damp Alert Press to turn the Damp Alert function on or off. An iron
indicator appears on the right side of the display. The dryer
beeps for 10 seconds when the moisture in the clothes is ideal
for ironing. At this time, you can take those garments out and
continue drying the remaining clothes by pressing
Start/Pause.
Note: The dryer will not stop drying if you don't take garments
out.
9
Cycle selector Turn the knob to select the ideal cycle for your type of load. The
cycle you select determines the heat control for the cycle.
Normal, Jeans, Perm Press, Quick Dry, My Cycle, Mixed Load,
Heavy Duty, Bulky, Towels, Active Wear, Delicates, and Sanitize
are Sensor cycles. Your cycle’s drying time is determined by the
moisture in your clothes.
Wool, Air Fluff, Time Dry, and Refresh are Manual cycles.
10
Start/Pause Press to start or pause the program. You can't change any
setting except add a garment.
# ITEM DESCRIPTION
1
Delay start
indicator
Displays when your dryer’s delay start setting is turned on.
The cycle time shows how long until your dryer starts
running.
2
Child lock
indicator
Displays when the child lock is turned on. Press (signal)
and Damp Alert together for three seconds to turn the
child lock function on or off.
3
Empty lint filter
indicator
Appears when the lint filter needs to be cleaned. See
“Cleaning the lint filters
” on page 32 for more information.
4
Empty water
reservoir indicator
Displays when the water reservoir needs to be emptied.
See “Emptying the water reservoir
” on page 34 for more
information.
# ITEM DESCRIPTION
To Next Page
Loading...
Need help?
General
