Insignia NS-HF2007 - Page 20

www.insigniaproducts.com
20
58" TV Gaming Stand
STEP 13:
You need:
1 Insert four dowels (EE) into the middle holes on the base (A). Make sure that you use the inner hole on each pair of
holes.
2 Insert four cam screws (CC) into holes on the base. Make sure that you use the outer hole on each pair of holes.
3 Tighten the screws with a Phillips screwdriver.
CC Cam screw (4)
EE Dowel (4)
Phillips screwdriver
EE
EE
EE
EE
CC
CC
CC
CC
CC
EE