Insignia NS-HFMS80 - STEP 8: Assembling the metal base

www.insigniaproducts.com
15
Console for TVs up to 80”
STEP 8: Assembling the metal base
You n ee d :
• Insert four 5/8” bolts (JJ) with four lock washers (LL) and flat washers (MM) through the holes in the metal stretcher (T),
into the metal bases (S), then tighten the bolts with the 4 mm hex wrench (RR).
RR Hex wrench 4 mm (1)
LL Lock washer (4)
MM Flat washer (4)
S Metal base (2)
T Metal stretcher (1)
JJ 5/8” bolt (4)