Insignia NS-HFMS80 - STEP 21: Install the door hinges and handles

www.insigniaproducts.com
28
STEP 21: Install the door hinges and handles
You n ee d :
1 Extend two door hinges (GG) and rest the hinge cups onto the cutouts of each door (I). Secure the door hinges (GG) in
place by using two zinc screws (FF) for each.
2 Attach one handle (HH) to the front side of the door (I) with two handle bolts (II).
3 Complete this step once again to assemble the other door (I).
Phillips screwdriver
GG Hinges (4)
FF Zinc screws (8)
HH Handles (2)
II Handle bolts (4)
I Door (2)
x2