www.insigniaproducts.com
29
Console for TVs up to 80”
STEP 22: Install the doors
You n ee d :
1 Align one door (I) to the pre-attached bolts on the two hinges (GG) with the threaded holes on the hinge supports on
the left side panel (C), then secure with a Phillips screwdriver.
2 Repeat the same process to attach the other door (I) to the right side panel (D).
3 Open and close the doors to make sure they are aligned and shut correctly. If necessary, adjust the screws on the hinge
arm for a better fit.
To Next Page
Loading...
