www.insigniaproducts.com
34
STEP 27: Position the TV console and install the tipping restraint
You n ee d :
1 Position the assembled console against the wall where you plan to use it.
2 Adjust the leveling feet to level the TV console.
3 Follow the instructions printed on the bag containing the tipping restraint hardware kit (UU) to attach the restraint
hardware to the wall and the console.
WARNING: It is very important that the tipping restraint be installed correctly. Failure to do this could result in your
TV console falling forward, resulting in damage to equipment or personal injury.
Drill
UU Tipping restraint (2)
Drill
Drill bit
Rubber mallet
Short screw
Metal bracket
Nylon strap
Wood stud
Leveling foot
Long screw
To Next Page
Loading...
