www.insigniaproducts.com
33
Console for TVs up to 80”
STEP 26: Change the door panel
You n ee d :
Follow these steps if you want to change your console’s door panels from glass to wood. Otherwise, skip this step.
1 Rotate the clips to remove the old panel. Loosen the screw on each of the clips if necessary
2 Insert the new panel, then rotate the clips and tighten the screws to secure the panel in the door frame.
3 Repeat this process to replace the other door panel.
Phillips screwdriver
J Wood panels (2)
Clip
Glass door panel
Wood door panel
To Next Page
Loading...
