55" 1080p LCD HDTV
QUICK SETUP
GUIDE
NS-L55X-10A 55" LCD TV
Thank You
for purchasing this ne Insignia television.
We hope you enjoy the quality and reliability
of this product for years to come.
_______________________________
Universal remote control TV codes (for all Insignia TVs manufactured after Jan. 1, 2007)
Philips
PHDVD5, PH5DSS,
PMDVR8, PDVR8
115
DirectTV
RC23
10463
RCA
RCU807
135
One for All
URC-6690
0464
Sony
RM-VL600
8043
Comcast
M1057
0463
Dish Network
VIP508, VIP622
720
Motorola
DRC800
0463
TIVO
Series 3, HD
0091
Universal remote control makers and models Set-top box makers and models
Remote control
and
2 AA batteries
Component cable
Quick Setup Guide
AC power
cord
Audio
cable
Front features
Installing a wall-mount bracket
1 Carefully place your TV screen face-down on a cushioned, clean surface to
protect the screen from damages and scratches.
2 Remove the four screws holding the TV to its stand.
3 Remove the stand column.
4 Secure the wall-mount bracket to the back of your TV using the screws and
spacers provided with the wall mount.
Setting up your remote control
1 While pressing the release button on the battery compartment cover on the
back of the remote, lift the cover o the remote.
2 Insert two AA batteries into the battery compartment. Make sure that the +
and – symbols on the batteries align with the + and – symbols in the battery
compartment.
3 Replace the cover.
Programming your remote control
To program your existing universal remote control to work with your new
Insignia TV, see the table below for common codes. If you have problems
programming your remote or need a dierent remote control code, visit
www.insigniaproducts.com for the latest remote control code information.
Connecting a DVD or Blu-ray DVD player, cable box,
satellite receiver or, game station
Using HDMI (best)
Using component (better)
Using composite (good)
Connecting an antenna
Connect a coaxial cable (not included) to the ANT/CABLE IN jack on the back of
your TV and the RF OUT jack on the antenna.
Cleaning clothRemote control holder
Menu
Input source select
Game
Power on/standby
Channel /
Volume + / -
Remote control sensor
Light sensor
Power/standby indicator
To Next Page
Need help?
General