23
3.Remove the power module
ķ Remove the four screws indicated on the
figure above by ƻ
ĸ Then remove the power module
4. Remove the Main board
ķ Remove the four screws indicated on the
figure above by ƻ
ĸ Disconnected the coupler CN28ǃCN2ǃCN26ǃ
CN22ǃCN23ǃCN20ǃCN21
Ĺ Remove the Main board
6.1 whole machine
5. Remove the speaker
Remove the four screws, take out the speaker
6. Remove the remote control board
Remove the two screws, take out the remote control
board
To Next Page
Loading...
