Note: The driver software must be installed before you connect the adapter. The adapter does not
need to be connected for the software to install.
To install on a Windows PC:
Note: If your computer does not have a disc drive, you can download the driver from
www.insigniaproducts.com. Search for your model number (NS-PU98505) to find the driver on the
product page. Or, attach an external disc drive to your computer.
1. Insert the driver CD into the optical drive on your computer. The software should run
automatically. The initial installation screen opens.
Note: If the software does not run automatically, locate and double-click Run.exe on the driver
CD.
2. Click on your operating system, then follow on-screen instructions.
Note: Windows 10 and Windows 8.1 have a built-in driver. It
allows you to use the adapter’s basic functions without installing the drivers. For other situations,
you must install the drivers from the CD.
3. When the installation is complete, click Finish to restart your computer and finish the installation.
4. Connect the USB connector on the adapter to an open USB port on your desktop or
laptop computer.
5. Connect a network cable to the Ethernet port on the adapter.
To install on a Mac:
1. Insert the driver CD into the optical drive of your computer. On the driver CD, locate and click
AX88772.dmg. Click the AX88772 icon. The driver setup driver setup dialog box opens.
2. When the installer screen opens, click Continue to start the installation, then follow the
To Next Page
Loading...
