www.insigniaproducts.com
31
4.8 Cu. Ft. Freestanding Gas Convection Range with Steam Cleaning
Positioning the oven racks
You can remove and reposition the oven racks in any of the six rack positions. Each oven rack has a built-in stop to prevent
it from accidentally being pulled completely out. Correct positioning of the oven racks provides the best cooking results.
Removing an oven rack
1 Pull the rack straight out until it stops.
2 Lift up the front of the oven rack and pull to remove it from the oven.
Note: The rack position above 6 is not usable.
CAUTIONS:
• Do not cover an oven rack with aluminum foil. This disturbs the heat circulation and results in poor baking.
• Do not place aluminum foil on the oven bottom because it could cause damage.
• Arrange the oven racks only when the oven is cool.
• When placing an oven rack in the top most rack position, make sure that the rack is stably situated on the embossed stop.
To Next Page
Loading...
Need help?
General
