Insignia NS-TVMFP23 User Manual

FIXED-POSITION WALL MOUNT FOR TVs 40-70 in.
9
www.insigniaproducts.com
STEP 4 - Determine wall-mount location
Note:
• For more detailed information on determining where to drill your holes, visit our online height-finder
at: http://mf1.bestbuy.selectionassistant.com/index.php/heightfinder
• Your TV should be high enough so your eyes are level with the middle of the screen. This is normally
40 to 60 in. from the ground.
The center of your TV will be offset .80 in. lower than the center of the wall plate (A). Before you drill holes
in the wall:
1 Measure the distance from the bottom of your TV to the middle (half of the height of the TV). This is
measurement a.
2 Measure the distance from the floor to where you want the bottom of the TV to be placed on the wall.
Keep in mind that the bottom of the TV should be placed above any furniture (such as entertainment
centers or TV stands). The TV should also be above items placed on top of the furniture (like a Blu-ray
player or cable box). This measurement is b.
3 Add a + b. The total measurement is the height where you want the center of the wall plate to be on the
wall.
4 Use a pencil to mark this spot on the wall.
You’ll need
A
B
a
b
Measuring tape
Pencil
NS-TVMFP23-NS_TVMFP23-C_14-0745_MAN_V2_ENG.fm Page 9 Sunday, August 10, 2014 10:17 PM

Insignia NS-TVMFP23 Specifications

General

Brand	Insignia
Model	NS-TVMFP23
Category	TV Mount
Language	English