11
4.1 Cu. Ft. Top-Load Washer
www.insigniaproducts.com
Choosing a location
For best performance, you must install your washer on a solid, level floor.
Wooden floors may need to be reinforced to minimize vibration or unbalanced load situations.
Carpeting and soft tile surfaces can contribute to excessive vibration, which can cause your washer to move slightly
during the spin cycle.
Warning
• Do not install your washer in areas where water may freeze, because
your washer always retains some water in its water valve, pump, and
hose areas. Frozen water can damage the belts, pump, hoses, and other
components.
• Never install on a platform or weakly supported structure.
NS-TWM41WH8A_17-0655_MAN_V2_EN.fm Page 11 Friday, August 4, 2017 8:10 PM
To Next Page
Loading...
