15
Built-in 4.9 Cu. Ft. Wine Cooler
www.insigniaproducts.com
Arranging bottles for maximum storage
If you will only be storing smaller bottles, we suggest that you use the “All
small bottles” layout shown above.
If you will be storing a combination of large and small bottles, the “Large
and small bottles” layout suggested above may help. Due to the wide
range of bottle sizes available, we suggest that you begin by placing the
large bottles (over 2 31/32”) on the top shelf, then place the smaller
bottles (2 31/32” or smaller) in the available space remaining. The second
shelf will only accomodate smaller bottles. If you need to accomodate
additional larger bottles, we suggest removing the third shelf, then begin
by placing the smaller bottles on the fourth shelf, then place the larger
bottles on top of them. The bottom shelf should be reserved for smaller
bottles only. The following information should help you plan your storage
layout:
Shelf spacing from top to bottom
• Top to first shelf - 4 1/3” (11 cm)
• Between first and second shelf - 2 31/32" (7.55 cm)
• Between the control panel and the third shelf - 3 1/5” (8.18 cm)
• Between the third and fourth shelves - 2 31/32" (7.55 cm)
• Between the fourth and fifth shelves - 6 2/32" (15.4 cm)
Bottle size chart
Use this chart to determine if the bottle type you want will fit:
Note
The compressor takes up some space above the 5th shelf, so
some bottles may not fit.
Standard Racking Bottle width Will it fit?
Split (375 ml) 2 3/8” Yes
Bordeaux 2 7/8” Yes
All small bottles (2 31/32“ or smaller) Large (over 2 31/32”) and small bottles
NS-WB44SS8_17-0586_MAN_V1_ENG.fm Page 15 Monday, August 14, 2017 8:44 AM
To Next Page
Loading...
