Insignia Sonic - CONNECTING AN AUDIO DEVICE; Bluetooth; 3.5 mm audio cable

the back of your speaker.
2. Connect the other end of the USB cable to a USB port
on your computer or wall adapter (not included). The
LED indicator is red while charging, then turns off
when the speaker is fully charged.
Note: The speaker beeps continually when the battery is low
CONNECTING AN AUDIO DEVICE
Bluetooth
1. Press and hold (power) to turn on your speaker. The
LED indicator blinks blue quickly and your speaker
automatically enters pairing mode.
2. Make sure that your Bluetooth device is within 33 ft.
(10 m) of your speaker.
3. Turn on your Bluetooth device, turn on Bluetooth, then
enter pairing mode. For more information, see the
documentation that came with your Bluetooth device.
4. On your Bluetooth device, select Insignia Sonic. Your
speaker pairs with your Bluetooth device and the LED
indicator lights solid blue.
5. To disconnect, un-pair your Bluetooth device from
your speaker.
OR
6. Press and hold (Bluetooth) for two to three seconds
on your speaker. Your Bluetooth device loses
connection automatically.
3.5 mm audio cable
Connect a 3.5 mm audio cable (not included) from your
speaker’s AUX jack to your audio device’s
headphone/audio out jack.