Inspire M3 User Manual

Install Fabric Shroud
Top Shroud Plate
Shroud Plate Adjustment Bolts
Bottom Shroud Plate
Step 50: To install Fabric Shroud, start at the front of the top shroud plate and wrap the edge
of the fabric shroud around the shroud plate. Pull tight as you wrap and make sure that
the velcro rim on the fabric shroud seals firmly to the velcro rim on the Shroud Plate.
Next, Do the same for the bottom of the fabric shroud around the bottom shroud plate.
Be sure to pull tight as fabric shroud is wrapped.
If ripples appear on the fabric shroud, undo the top of the shroud and re-wrap, pulling
up as the shroud is wrapped. This should give a nice smooth consistency to the shroud.
(If necessary, shroud can be tightened by adjusting the Shroud Plate Adjustment Bolts.)
Page 30
STEP 50

Inspire M3 Specifications

General

Resistance Type	Weight Stack
Weight Capacity	300 lbs
Color	Black
Frame	Steel
Finish	Powder coat
Material	Steel
Included Accessories	Lat Bar
Exercises	Chest Press, Incline Press, Decline Press, Lat Pulldown, Seated Row, Leg Extension, Leg Curl, Preacher Curl, Ab Crunch
Press Arm	Adjustable