9
BATTERY REMOVAL FROM THE BIKE
Insert the key into the lock and turn the key 180° to the left to unlock the battery. Carefully pull the
battery from the holder.
BATTERY CHARGING
The electric bicycle is equipped with a Lithium-Ion battery that powers the motor. Unlike other
batteries, lithium-ion batteries are not subject to a "memory effect" and can recharged even if they are
not completely empty.
The total battery capacity is reached after several loads and unloading.
The first time, the battery must be charged for 12 hours.
We recommend that always, the batteries, to be charged at maximum capacity (100%).
• First connect the charger to the battery. The connection to the battery is located on the right
side of the battery, sometimes be masked by a protective rubber flap.
• Only then insert the charger plug into a power outlet.
During charging, the charger LED lights red to indicate that the battery is charging. The LED
turns green when the battery is fully charged.
• After charging, remove the plug from the wall outlet first and then only plug battery charger.
To Next Page
Loading...