Insta 256 Series - Safety and Danger Zone Diagram; Operating Environment

4
FOR USE BY QUALIFIED PERSONNEL ONLY
Safety and Danger Zone Diagram
Operating Environment
To maximize user safety, ensure that the
following operating conditions are met:
3. The surface can support a minimum of 300 lbs (136
kg).
4. The workspace does not restrict access to the main
power switch or power cord.
5. The workspace is free of any forms of liquid.
6. The power cord is not overextended.
7. The machine is connected to a surge protector.
Taking these steps is crucial in maximizing user
safety and ensuring a long, trouble-free life for your
machine!
1.
After unpacking the machine, rotate the
pressure crank handle (located behind
the top housing) clockwise to release the
platen pressure.
2. The machine is placed on an even, non-
flammable surface.
Do not handle the
machinery with
wet hands
This is a hot surface.
Avoid contact with
upper platen shroud
Keep hands clear
between the upper
and lower platens
Machinery should be
operated on a secure
flat surface
Do not disable safety
lock during normal
operation
Always place
handle in the
full back position when
machine is not in operation