Flow Pro User Manual
Battery Level/Gimbal Mode Indicators
• Check current battery level.
• Shows current gimbal mode: AUTO = Auto, F = Follow, PF =
Pan Follow, FPV = FPV.
LED Indicator Lights Status
All four LEDs blink slowly when Flow Pro is in standby mode.
All four LEDs blink quickly when an error has occurred. The two most common reasons are:
• Flow Pro is physically prevented from moving or is experiencing a technical error. Remove
any obstacles, then press any button.
• The phone is not centered or secure in the phone clamp. This may lead to abnormal motor
heating and trigger Flow Pro's overheating protection. Please recenter and secure the phone.
To Next Page
Loading...
